The latest supported is Ubuntu 18.x LTS for now. Please also be informed that we do not have an Ethernet controller that supports Ubuntu 20.04-2 as of the moment.
#Intel e1000 nic driver update
Possible that this issue is already hardware related as it could not update the firmware due to port 1 error detected.Īs for replacement NIC suggestion, you may refer to the link below for the list of Intel adapters and their Supported Operating System. Please see below information for the feedback from engineering team. Which tool do you recommend for re-flashing a new firmware into that defective card ? It seems that I need to correct the firmware. Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/FullĪdvertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/FullĬannot get wake-on-lan settings: Operation not permittedĪny solution ? any hints will be appreciated. e1000 0000:02:04.0 eth0: Intel(R) PRO/1000 Network ConnectionĠ2:04.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet Controller (rev 05)ģ: enp2s4: mtu 1500 qdisc noop state DOWN group default qlen 1000
e1000: issue to your hardware vendor or Intel Customer Support. Please inspect the EEPROM dump and report the e1000: address manually before continuing to enable this network e1000: which is invalid and requires you to set the proper MAC e1000: result in further problems, possibly loss of data,
#Intel e1000 nic driver software
e1000: This is not a software error! Something bad happened to e1000: Include this output when contacting your support provider. Subsystem: Intel Corporation PRO/1000 MT Network Connection
#Intel e1000 nic driver install
I install Ubuntu 20.04.2, and it work correctlyĮxcept for the network card labelled Intel PRO/1000 GTĠ2:04.0 Ethernet controller : Intel Corporation 82541GI Gigabit Ethernet Controller (rev 05) I had an unused HP m7250n computer stored during 2 years.
0 kommentar(er)
